REPSOL SUPER TAURO PAG 460

Description
High performance lubricants, one hundred percent synthetic (polyglycols). They incorporate latest generation additives, which makes them ideal for severe applications at a wide range of temperatures: from √ 30≥C to more than 200≥C. They have been developed in order to provide extra protection against corrosion and separation of water.
Recommended uses
Industrial bearings and mechanisms working in very severe conditions and at high temperatures,bearings and in general in mechanisms which require EP lubricants with high thermal stability. Due to its excellent resistance to oxidation, it allows the periods of change to be widened, saving in costs dueto oil changes, cleaning of equipment and stops.
As a precaution, it cannot be mixed with mineral oils. It is necessary, therefore, to clean the installation whenever there is a change from mineral oil to Super Tauro PAG.
Qualities
Exceptional resistance to oxidation at high temperatures.
Low freezing point, which allows it to Cork at low temperatures.
High index level of viscosity, allowing for lubrication at a wide range of temperatures.
Exceptional friction rate, which makes it especially recommendable for worm gear reductants.
Free of chlorine and sulphur and lead based compounds.
Minimal formation of deposits.
Excellent water separating and anti-foaming properties.
Very good protection against rusting and corrosion.
Optimal EP properties.
Compatible with the majority if joints and gaskets.
Quality level
DIN-51517 Parte 3 CLP AGMA 250-04
ISO 6743/6 - CKC U. S. Steel 224
Technical characteristics

Presentations
Drums of 205 Kg.
Hazard Identification
The ISO-150 grade is classified according to the dangerous substances regulation:
Phrase R 52/53: Dangerous for aquatic organisms, it may cause long term negative effects in the aquatic environment.
Phrase S 61: Avoid freeing in the environment. Specific instructions are to be found in the safety data file.
The other grades are not classified as being toxic or dangerous according to current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measures
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.). Its components may have negative long term effects in watery areas. Avoid the entrance of material in water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.